強制對流直燃式空氣加熱器檢測

強制對流直燃式空氣加熱器檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 50155-2015供暖通風與空氣調節術語標準

本標準適用于供暖通風與空氣調節工程的設計、施工、驗收、運行維護及科研、教學等。

GB 50215-2015煤炭工業礦井設計規范

本規范適用于設計生產能力0.09Mt/a及以上的新建、改建及擴建的煤炭工業礦井的初步可行性研究、可行性研究和設計。

GB 50736-2012民用建筑供暖通風與空氣調節設計規范

本規范適用于新建、改建和擴建的民用建筑的供暖、通風與空氣調節設計，不適用于有特殊用途、特殊凈化與防護要求的建筑物以及臨時性建筑物的設計。

GB 51245-2017工業建筑節能設計統一標準

本標準適用于新建、改建及擴建工業建筑的節能設計。特殊行業和有特殊要求的廠房或部位的節能設計，應按其專項節能設計標準執行。

HG/T 20541-2006化學工業爐結構設計規定

本規定主要適用于化工、石油化工裝置管式爐及化工生產過程中受火焰直接加熱、焙燒、焚燒及氣化的圓筒爐和箱式爐的設計，也適用于燃燒器，管架及管板，煙囪、煙道、調節擋板及通風設備，附件和構件設置、選用，測試及安全接口設置等的設計、選用。 本規定不適用于重油氣化噴嘴等非燃料燃燒用的噴射器及混合器的設計。 本規定不適用于工程管道所用的管架的設計。 本規定不適用于桁架式高煙囪和帶拉繩煙囪的設計。

HG/T 20657-2013化工采暖通風與空氣調節術語

本標準適用于化工采暖通風與空氣調節及其冷熱源工程的設計、科研、施工、驗收及維護管理等方面。本標準主要選取化工采暖通風與空氣調節工程中的常用術語。執行本標準時,尚應遵守現行的有關標準的規定。

SH/T 3036-2012一般煉油裝置用火焰加熱爐

本標準規定了一般煉油裝置用火焰加熱爐、空氣預熱器、通風機和燃燒器等的設計、材料選用、制造、檢驗、試驗、運輸準備和安裝等方面的低要求并給出了建議。本標準適用于一般煉油裝置用火焰加熱爐的設計、制造及驗收。本標準不適用于蒸汽轉化爐和乙烯裂解爐的設計。

SL 490-2010水利水電工程采暖通風與空氣調節設計規范

本標準適用于新建、改建和擴建的大、中型水利水電工程（含通航建筑物，大、中型泵站及閘站等）的采暖通風與空氣調節設計。

YC/T 384.2-2018煙草企業安全生產標準化規范 第2部分:安全技術和現場規范

YC/T 284的本部分規定了煙草企業安全生產標準化的安全技術和現場規范要求，包括設備設施、作業活動、作業環境和現場運行的安全要求。本部分適用于省級煙草公司(局)、省級工業公司等省級公司、煙草加工和煙草商業生產經營單位。其中，煙草商業生產經營單位特指地市級煙草公司，煙草加工單位含煙葉復烤、卷煙制造、雪茄煙制造、再造煙葉生產的單位。煙草配套和多元化投資的其他生產經營單位，如醋酸纖維、煙草印刷等單位可參照執行。

JGJ 353-2017焊接作業廠房供暖通風與空氣調節設計規范

本規范適用于新建、擴建、改建和既有廠房專項技術改造的焊接作業廠房的供暖、通風與空氣調節設計。

JS 10123-2007專用液化石油氣設備用規范.可移動和便攜式非家用強制對流直燃式空氣加熱器

This standard defines, for the purpose of type examination, the construction, the safety characteristics, the test methods and the marking of mobile and portable non-domestic forced convection direct fired air heaters with arated heat input not exceeding 180 kw .

TS EN 1596-2002專用液化石油氣器具規格. 移動和便攜式非家用強制對流直燃式空氣加熱器

It defines construction safety test methods and marking of mobile and portable non- domestica forced convection direct fired air heaters.

TS EN 1596/A1-2007專用液化石油氣器具規格. 移動和便攜式非家用強制對流直燃式空氣加熱器

It defines construction safety test methods and marking of mobile and portable non- domestica forced convection direct fired air heaters

DIN EN 746-2-2011工業熱處理設備.第2部分:燃燒和燃料處理系統的安全要求;德文版本EN 746-2-2010

This part of EN 746 together with EN 746-1 specifies safety requirements for single and multiple burners that are part of Industrial Thermoprocessing Equipment. (In this standard referred to as IThE).This document deals with significant hazards, hazardous situations and events relevant to combustion and fuel handling systems that are part of IThE as listed in Clause 4, when used as intended and under the conditions foreseen by the manufacturer.This European Standard covers:- fuel pipework downstream of and including the manual isolating valve;- burner(s), burner system and ignition device;- safety related control system (protective system).This European Standard applies to any oxidation with air or other gases containing free oxygen of gaseous, liquid and solid fuels or any combustion of them to release thermal energy.For thermal or catalytic post combustion and waste incineration, this European Standard applies only to auxiliary burners designed to start-up and/or support the process.The pressure hazard of piping and components covered by this standard is within the limits of maximum pressure/size relationship as described in normative Annex E.This European Standard also gives the necessary requirements for the information for use.This European Standard does not cover hazards from heating generated by electricity.This European Standard does not deal with the hazards created by the release of flammable substances from the products processed in the IThE.This European Standard is not applicable to electricity cabling and power cabling upstream of the IThE control panel/protective system.Noise can be a significant hazard for combustion and fuel handling systems. It is not dealt with in this standard.This European Standard is not applicable to combustion and fuel handling systems as part of IThE which is manufactured before the date of its publication as EN.