鋁蜂窩地板檢測

鋁蜂窩地板檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

HB 5339-2011金屬結構膠接質量控制

本標準規定了金屬結構膠接的人員、設備、儀表及工裝、材料、工藝過程、環境、文件與資料等要求。本標準適用于金屬結構膠接的質量控制。

HB 8438-2014民用飛機復合材料結構設計通用要求

本標準規定了民用飛機復合材料結構的設計原則、選材、強度/剛度、損傷容限、耐久性及典型結構的設計要求和相關的驗證要求。本標準適用于民用運輸類飛機，其他飛機可參照使用。

MH/T 6061-2010飛機廚房手推車、物品箱及相關組件的低設計和性能

本標準規定了安裝在運輸類飛機廚房和其他區域的手推車、物品箱及相關組件的低設計和性能要求，以及供儲存艙設計人員和設備安裝人員使用的安裝要求。 本標準適用于但不限于下列安裝在運輸類飛機廚房和其他區域的設備： a) 全長車和半長車(主要用于裝載飲料、物品箱、食物、商品和垃圾)； b) 折疊車； c) 物品箱(便攜箱、標準箱和餐箱)； d) 儲存在手推車和(或)廚房?jī)?chǔ)存艙里的非固定相關組件，如抽屜、托盤、垃圾箱襯里或其他類似組件。 本標準沒有完全涵蓋以下內容： a) 具有自備的機械制冷系統、電動機、其他電器部件或通過加壓系統分配飲料的手推車或物品箱。 b) 延長使用壽命和持續適航的設計細則，因?yàn)檫@些細則可能隨以下因素變化： 1) 廚房和食品(飲料)系統總體設計； 2) 營運人希望的人因工程； 3) 手推車或物品箱的使用方法和注意事項； 4) 手推車或物品箱的維護方法； c) 民用航空規章、相關公眾健康規章和(或)設計細則的相關要求，該要求涵蓋在客艙服務人員或飛機制造商對主要設備的規范中。

MH/T 6104-2014航空地毯抗靜電性能的試驗方法

本標準規定了測試航空地毯的抗靜電性能的試驗方法。本標準適用于評估飛機客艙內地毯的抗靜電性能。

DB11/T 512-2007建筑裝飾工程石材應用技術規程

本規程適用于建筑裝飾工程中裝飾石材的材料、設計、加工制作、施工、驗收以及防護、保養和翻新。

EN 14015-2004在室溫及高于環境溫度液體儲存用平底,立式,圓柱形,現場建造的地面上可焊鋼罐的設計和制造規范

This document specifies the requirements for the materials, design, fabrication, erection, testing and inspection of site built, vertical, cylindrical, flat bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperatures and above, and the technical agreements that need to be reached (see Annex A).

BS EN 14015-2004在室溫和高于室溫下液體儲存用現場建造的立式、圓柱形、平底、地上用焊接鋼罐的設計和制造規范

1 This document specifies the requirements for the materials, design, fabrication, erection, testing and inspection of site built, vertical, cylindrical, flat bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperatures and above, and the technical agreements that need to be reached (see Annex A).\nThis document does not apply to tanks where the product is refrigerated to maintain it as a liquid at atmospheric pressure (see prEN 14620).\nThis document is concerned with the structural integrity of the basic tank structure and does not provide requirements for considering process design, operational issues, safety and firefighting facilities, in-service inspection, maintenance or repair. These aspects are covered in detail in other Codes of Practice (see Annex B).\n2 This document applies to closed-top tanks, with and without internal floating covers (see Annex C) and open-top tanks, with and without floating roofs (see Annexes D and E). It does not apply to 'lift-type' gas holders.\n3 This document applies to storage tanks with the following characteristics:\na) design pressure less than 500 mbar and design internal negative pressure not lower than 20 mbar (see 5.1 for pressure limitations);\nb) design metal temperature not lower than -40 ℃ and not higher than +300 ℃ (see 5.2.2);\nc) maximum design liquid level not higher than the top of the cylindrical shell.\n4 The limits of application of this document terminate at the following locations.\n— face of the first flange in a bolted flange connection;\n— first threaded joint on the pipe or coupling outside of the tank shell, roof or bottom;\n— first circumferential joint in a pipe not having a flange connection.\n5 This document is applicable to steel tanks with a maximum design strength ≤ 260 N/mm.\n6 In addition to the definitive requirements, this document also requires the items detailed in Annex A to be documented. For compliance with this document, both the definitive requirements and those required in Clause 4 have to be satisfied.\nnote:1) All pressures are in mbar gauge unless otherwise stated.

IS 11649 Pt.2-1986鋁蜂窩夾層板民用飛機地板規范第2部分試驗方法

Prescribes the methods of tests for honeycomb type sandwich panel for civil aircraft floors.