潔凈室服裝檢測

潔凈室服裝檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 24249-2009防靜電潔凈織物

本標準規定了防靜電潔凈織物的技術要求、試驗方法、檢驗規則、標志、包裝、運輸及貯存。本標準適用于在電子、半導體、醫藥、食品等行業的潔凈室及相關受控環境使用的，用以制成潔凈室服裝、帽子、手套、鞋套等產品的織物。

GB/T 24579-2009酸浸取.原子吸收光譜法測定多晶硅表面金屬污染物

1. 1本標準規定了用酸從多晶硅塊表面浸取金屬雜質，并用石墨爐原子吸收定量檢測多晶硅塊表面上的痕量金屬雜質分析方法。1.2本標準適用于堿金屬、堿土金屬和第一系列過渡元素如鈉、鋁、鐵、鉻、鎳、鋅的檢測。1.3本標準適用于各種棒、塊、粒、片形多晶或單晶硅表面金屬污染物的檢測。由于塊、片或粒形狀不規則，面積很難準確測定，根據樣品重量計算結果。使用的樣品重量為50 g～300 g，檢測限為0.01 ng/g。1.4酸的強度、組成、溫度和浸取時間決定著表面腐蝕深度和表面污染物的浸取效率。在這個試驗方法中腐蝕掉的樣品重量小于樣品重量的1%。1.5該試驗方法提出了一種特定的樣品尺寸、酸組成、腐蝕周期、試驗環境和儀器方案，這些參數可以調整，但可能影響金屬的回收效率及滯留量。該方法適用于重量為25 g～5 000 g的樣品的測定，為達到仲裁的目的，該試驗方法規定樣品重量為300 g。該試驗方法在干擾和結果的偏差方面做了詳細說明。1.6該試驗方法詳細說明了用于分析酸提取痕量金屬含量的石墨爐原子吸收光譜法的使用。也可使用靈敏度相當?shù)钠渌麅x器如電感耦合等離子體/質譜儀。1.7方法的檢測限和偏差取決于酸提取過程的效率、樣品尺寸、方法干擾、每個元素的吸收譜及儀器靈敏度、背景和空白值。1.8該方法是用熱酸來腐蝕掉硅表面，腐蝕劑是有害的，操作必須在通風櫥中進行，整個過程中必須非常小心。氫氟酸溶液非常危險，不熟悉專門防護措施的人不能使用。

GB/T 25915.5-2010潔凈室及相關受控環境 第5部分：運行

GB/T 25915的本部分規定了潔凈室運行的基本要求，供準備使用并運行潔凈室的人員使用。本部分內容未涉及與污染控制有直接關聯的安全問題，相關問題應遵守和地方的安全法規。本部分涉及生產各類產品的各個級別的潔凈室。應用范圍廣泛，但未涉及各個行業的特定要求。本部分未包括潔凈室的常規監測方法和規劃的細節，關于粒子的監測參見GB/T 25915.2和GB/T 25915.3，微生物的監測參見GB/T 25916.1和GB/T 25916.2。

FZ/T 80012-2012潔凈室服裝.點對點電阻檢測方法

本標準規定了潔凈室服裝點對點電阻的檢測方法。其中包括術語和定義、檢測原理、檢測裝置、檢測環境、檢測程序、結果報告。本標準適用于潔凈室服裝的檢測。在電子、醫藥、航空航天、精密儀器等行業使用的無潔凈性能要求的防靜電服裝也可按照本標準規定的方法檢測點對點電阻。

FZ/T 80013-2012潔凈室服裝.易脫落大微粒檢測方法

本標準規定了潔凈室服裝易脫落大微粒的檢測方法，其中包括：術語和定義、檢測項目、檢測原理、檢測條件、檢測操作、數據處理、結果報告等。本標準適用于紡織機織物制作而成的潔凈室服裝，非織造布制作的潔凈室服裝也可參照進行。本標準不適用于非透氣性材料在座的潔凈室服裝。

FZ/T 80014-2012潔凈室服裝.通用技術規范

本標準規定了潔凈室服裝的通用技術要求、試驗方法、檢驗規則和包裝、標識、運輸及貯存等全部技術特征。本標準適用于在電子、航空、航天、精密儀器、醫藥等行業的潔凈室及相關受控環境使用的工作服裝。特定行業對于潔凈室服裝的特殊要求，如微生物性能、硅油含量、離子含量等，應參照相關行業的專門規定。本標準不適用于不透氣型材料制作的潔凈室服裝。

ASTM F51/F51M-2020潔凈室服裝內外顆粒污染物尺寸測定及計數的試驗方法

1.1 This test method covers the determination of detachable particulate contaminant 5 μm or larger, in and on the fabric of clean room garments. 1.2 This test method does not apply to nonporous fabrics such as Tyvek (trademarked) or Gortex (trademarked). It only applies to fabrics that are porous such as cotton or polyester. 1.3 This test method provides not only the traditional optical microscopic analysis but also a size distribution and surface obscuration analysis for particles on a fine-textured membrane filter or in a tape lift sample. It utilizes transmitted illumination to render all particles darker than the background for gray level detection. Particles collected on opaque plates must be transferred to a suitable membrane filter. 1.4 Units—The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.5 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

EN ISO 14644-4-2001潔凈室和相關控制環境.第4部分:設計,建造和啟用 ISO 14644-4-2001

This part of ISO 14644 specifies requirements for the design and construction of cleanroom installations but does not prescribe specific technological or contractual means to meet these requirements. It is intended for use by purchasers, suppliers and designers of cleanroom installations and provides a checklist of important parameters of performance. Construction guidance is provided, including requirements for start-up and qualification. Basic elements of design and construction needed to ensure continued satisfactory operation are identified through the consideration of relevant aspects of operation and maintenance.NOTE Further guidance in respect of the

DIN EN 16602-70-58-2015航天產品保證. 潔凈室的生物負荷控制; 英文版本EN 16602-70-58-2015

This standard establishes the principles and basic methodology for microbiological control of cleanrooms and associated controlled environments with planetary protection constraints. This standard does not address: the microbiological contamination control of spaceflight hardware; molecular contamination control. Reference is made to other documents; fire and safety regulations; for these, see regulatory requirements and other national or local documentation. This standard does not lay down the methods for determining the microbiological and particulate cleanliness levels. Reference is made to other documents. This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS-S-ST-00.

DIN EN ISO 13408-1-2015保健品無菌加工.第1部分:通用要求(ISO 13408-1-2008,包含Amd 1-2013).德文版本EN ISO 13408-1-2015

ISO 13408-1:2008 specifies the general requirements for, and offers guidance on, processes, programmes and procedures for development, validation and routine control of the manufacturing process for aseptically-processed health care products.ISO 13408-1:2008 includes requirements and guidance relative to the overall topic of aseptic processing. Specific requirements and guidance on various specialized processes and methods related to filtration, lyophilization, clean-in place (CIP) technologies, sterilization in place (SIP) and isolator systems are given in other parts of ISO 13408.

BS EN ISO 14644-4-2001潔凈室和相關控制環境.設計,建造和啟動

This part of ISO 14644 specifies requirements for the design and construction of cleanroom installations but does not prescribe specific technological or contractual means to meet these requirements. It is intended for use by purchasers, suppliers and designers of cleanroom installations and provides a checklist of important parameters of performance. Construction guidance is provided, including requirements for start-up and qualification. Basic elements of design and construction needed to ensure continued satisfactory operation are identified through the consideration of relevant aspects of operation and maintenance.\nNOTE Further guidance in respect of the above requirements is given in annexes A to H. Other parts of ISO 14644 may provide complementary information.\nApplication of this part of ISO 14644 is restricted in the following:\n— user requirements are represented by purchaser or specifier;\n— specific processes to be accommodated in the cleanroom installation are not specified;\n— fire and safety regulations are not considered specifically; the appropriate national and local requirements should be respected;\n— process media and utility services are only considered with respect to their routing between and in the different zones of cleanliness;\n— regarding initial operation and maintenance, only cleanroom construction-specific requirements are considered.