歡迎訪問中科光析科學技術研究所官網！
- 聯系我們
- 關注微信
歡迎訪問中科光析科學技術研究所官網！
免費咨詢熱線
400-635-0567|
食品接觸用橡膠材料及涂層檢測項目報價？??解決方案？??檢測周期？??樣品要求？ |
點 擊 解 答?? |
GB 3883的本部分涉及電動機或電磁鐵驅動的:--手持式電動工具(第2部分);--可移式電動工具(第3部分);--園林工具(第4部分)。以下簡稱“工具”。交流單相或直流工具的額定電壓不大于250 V,交流三相工具的額定電壓不大于440 V。大額定輸入功率不超過3 700 W。本部分涉及人們?cè)谡２僮饕约昂侠砜深A(yù)見的使用工具時遇到的由工具引發的危險。帶電加熱元件的工具屬本部分范圍。這些加熱元件的要求在GB 4706的相關部分中規定。對于不與電網隔離、且基本絕緣由不按工具額定電壓設計的電動機,其要求在附錄B中規定。對于由可充電電池供電的電動機驅動或電磁鐵驅動的工具以及用于這些工具的電池包,其要求在附錄K中規定。對于能直接接在市電或非隔離電源上操作和/或充電的這類工具,其要求在附錄L中規定。不用對工具自身作任何改造便能夠安裝到一個支架或工作臺當作固定式工具使用的手持式電動工具屬于本部分范圍,由第3部分來規定。本部分不適用于:--在爆炸性環境(塵埃、蒸汽或氣體)中使用的工具;--制備和加工食品用工具;--醫療用工具;--與化妝品和藥品一起使用的工具;--加熱工具;--電動機驅動的家用或類似用途電器;--工業機床用電氣設備;--用來制作模型的由低壓變壓器驅動的小型臺式工具,如制作遙控飛機模型或汽車模型等。
GB/T 9106的本部分規定了鋁易開蓋鋁罐(以下簡稱兩片罐)的規格分類和結構尺寸、技術要求、試驗方法、檢驗規則和標志、包裝、運輸及貯存。本部分適用于盛裝啤酒、充碳酸氣及充氮飲料的未經使用的鋁易開蓋和鋁罐體的制造、流通和監督檢驗，盛裝其他內裝物的兩片罐可參照使用。
GB/T 9106的本部分規定了鋁易開蓋鋼罐(以下簡稱兩片罐)的規格分類和結構尺寸、技術要求、試驗方法、檢驗規則和標志、包裝、運輸及貯存。本部分適用于盛裝啤酒、充碳酸氣及充氮軟飲料的未經使用的鋁易開蓋和鋼制罐體的制造、流通和監督檢驗，盛裝其他內裝物的兩片罐可參照使用。
GB/T 16886的本部分規定了醫療器械在按照GB/T 16886其他部分規定的生物學系統進行試驗時，所要遵循的樣品制備和參照材料的選擇要求，并給出了程序指南。本部分具體提出了：——試驗樣品選擇；——從器械上選取有代表性的部分；——試驗樣品制備；——試驗對照；——參照材料的選擇和要求；——浸提液制備。本部分不適用于活體細胞，但可適用于含活細胞的組合產品中的材料或器械組分。
本標準規定了機器的衛生要求，并給出應由制造商提供的預定使用信息。本標準適用于其產品可能對消費者產生衛生風險的所有類型機器及其關聯設備。 本標準不包括對來自機器的微生物制劑的不可控侵染的相關要求。
本標準規定了食品接觸材料及制品中砷、鎘、鉻、鉛的測定和鋁、砷、鋇、鎘、鈷、鉻、銅、鐵、鋰、錳、鉬、鎳、鉛、銻、錫和鋅遷移量的測定。第一篇適用于食品接觸用紙和紙板材料及制品、軟木塞和竹木制品中砷、鎘、鉻、鉛的測定。第二篇適用于食品接觸用塑料材料及制品、食品接觸用涂料及涂層、食品接觸用橡膠材料及制品、食品接觸材料及制品用油墨、食品接觸材料及制品用黏合劑、食品接觸用紙和紙板材料及制品、奶嘴、搪瓷制品、陶瓷制品、玻璃制品、食品接觸用塑料樹脂、食品接觸用金屬材料及制品中鋁、砷、鋇、鎘、鈷、鉻、銅、鐵、鋰、錳、鉬、鎳、鉛、銻、錫和鋅遷移量的測定。
本標準適用于港口工程的規劃、勘測、設計、施工、監理、檢測、科研和管理。
本規范適用于化工、煤化工和石油化工建設項目中以鋼、鑄鐵為基體的設備，管道防腐蝕工程的施工及驗收。
本標準規定了鋼塑復合壓力管（以下簡稱管材）用管件的術語、定義、符號和縮略語、分類和標記、材料、要求、測試方法、檢驗規則和標志、包裝、運輸、貯存和質量證明書。 本標準適用于與CJ/T 183 規定的鋼塑復合壓力管相配套的管路系統的管件。
本標準規定了電炒鍋的的術語和定義、器具分類和型號命名、要求、試驗方法、檢驗規則、標志、包裝、運輸、貯存。本標準適用于額定電壓不超過250 V、額定功率不超過2 000 W的家用和類似用途電炒鍋。
本標準規定了電飯鍋及類似器具的范圍、定義、分類與命名、要求、試驗方法、檢驗規則和標志、包裝、運輸、貯存。 本標準適用于額定電壓不超過250V、額定功率不超過2000W、額定容積不超過10L的電飯鍋及類似器具。
本標準規定了電磁加熱電飯煲(鍋)的術語和定義、分類和型號命名、要求、試驗方法、檢驗規則和標志、包裝、運輸、貯存。本標準適用于額定電壓不超過250 V的家用和類似用途的電磁加熱電飯煲(鍋)。
本規范適用于新建、擴建、改建、遷建及設備大修的真空制鹽工廠整體安裝設備和現場組焊設備安裝工程施工及驗收，包括鹵水凈化、蒸發結晶、脫水、干燥、包裝、儲運工序和副產品芒硝及石膏等的生產設備以及與之配套的循環水設備。其他類似采用真空蒸發制鹽工藝及裝置生產的無機鹽(如芒硝)的設備安裝工程施工及驗收亦可參照本規范執行。熱壓制鹽工程的施工及驗收參照本規范執行。本規范未包括供熱、發電、機修、供水(不含制鹽循環水)、自控、電氣等和國外設備的安裝，其施工及驗收，應按有關現行或行業標準的規定和國外隨機技術條件(含設計圖)的規定執行。本規范涉及的管道安裝工程，其施工與驗收，應按現行標準GB 50235《工業金屬管道工程施工規范》、GB 50184《工業金屬管道工程施工質量驗收規范》和GB 50236《現場設備、工業管道焊接工程施工規范》的相關規范規定執行。本規范所引用的標準，凡是注日期的引用標準，僅所注日期的版本適用于本規范。凡是不注日期的引用標準，其新版本(包括所有的修改單)適用于本規范。
本規程適用于新建、擴建、改建的建筑工程中建筑室內外防滑地面的設計、施工及驗收。
These requirements cover robots and robotic equipment rated 600 V or less and intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70. Since end-use installation of a robot and robotic equipment may vary for each user application, guidelines for end-product installation may be evaluated to the applicable sections of ANSI/RIA R15.06, Standard for Industrial Robots and Robot Systems-Safety Requirements. Portions of the requirements in this Standard have been excerpted from the Robotic Industries Associations (RIA) Standard for Industrial Robots and Robot Systems - Safety Requirements, ANSI/RIA R15.06. These requirements cover robotic equipment and systems intended for indoor and outdoor use in applications such as parts assembly, parts transfer, automated material handling, inspection, loading, diecasting, deburring, welding, paint spraying, clinical/diagnostic systems, pharmaceutical applications, commercial food processing, automated vehicle refueling systems, library book handling/sorting, clean room applications, medical use for surgery, mobile robots, automated guided vehicles, automated storage/retrieval systems, and the like. Unique features or functions associated with the robotic application, not specifically addressed in this Standard, shall also be evaluated to other applicable Standards/requirements. These may include, but are not limited to, Electrical Equipment for Laboratory Use; Part 1: General Requirements, UL 3101-1; Medical and Dental Equipment, UL 544; Power Operated Pumps for Petroleum Product Dispensing Systems, UL 79. In addition to the requirements in this Standard, robots and robotic systems shall also comply with the applicable sections of the Electrical Standard for Industrial Machinery, ANSI/NFPA 79. Robots and robotic systems intended for use in hazardous locations, as defined by the National Electrical Code ANSI/NFPA 70, shall also comply with the requirements in Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations, UL 913. In the following text, a requirement that applies to one type of equipment, such as a controller or teach pendant, will be identified by a specific reference. In the absence of a specific reference or if the term robot or robotic equipment is employed, it is to be understood that the requirement applies to all types of equipment covered by this Standard.
This European Standard specifies the construction and performance characteristics as well as the requirements and methods of test for the safety and marking of freestanding and built-in domestic cooking appliances burning the combustible gases given in 4.1 according to the categories specified in 4.2, referred to in the text as \"appliances\".This European Standard covers the following types of domestic cooking appliances, as defined in Clause 3, and belonging to the classes defined in 4.3 (see Table 1): independent freestanding hotplates; independent built-in hotplates; independent hotplates and grills; table cookers; freestanding ovens; built-in ovens; freestanding or built-in grills; griddles; freestanding cookers; built-in cookers. Unless specifically excluded hereafter,This European Standard applies to these appliances or their component parts, whether or not the component parts are independent or incorporated into a single appliance, even if the other heating components of the appliance use electrical energy (e. g. combined gas-electric cookers).This European Standard includes requirements covering the electrical safety of equipment incorporated in the appliance that is associated with the use of gas. It does not include requirements covering the electrical safety of electrically-heated component parts or their associated equipment1).This European Standard does not apply to: a) outdoor appliances; b) appliances connected to a combustion products evacuation duct; c) appliances having a pyrolitic gas oven; d) appliances having covered burners which are not in conformity with the constructional requirements of 5.2.8.2.2; e) appliances incorporating flame supervision devices and having an automatic ignition device for which the duration of the ignition attempt is limited by design; f) appliances equipped with a burner that is periodically ignited and extinguished under the control of an automatic on/off device; 1) Refer to the electrical safety rules. g) appliances equipped with an oven and/or with a grill having a fan: 1) either for the supply of combustion air or for the evacuation of the products of combustion; 2) or for the circulation of the products of combustion within the compartments; h) appliances supplied at pressures greater than those defined in 7.; i) appliances having one or more burners that are capable of remote operation (type1 or type 2), unless the burner(s) concerned are thermostatically controlled oven burners of time-controlled ovens that are designed for a delayed start without the user being present; j) appliances incorporating one or more hotplate or grill burners that enable the user to program the cooking cycle, including the start and/or the end of the cycle.This European Standard does not cover the requirements relating to third family gas cylinders, their regulators and their connection.This European Standard only covers type testing.
This document describes the requirements for and methods of testing of organic linings which are applied tometallic process engineering equipment that will come in contact with chemical substances The requirementsspecified here may be used for the purposes of quality control (e.g. as agreed between the contractpartners.The standard applies to linings which serve one or more of the following purposes:-- to protect the component from adverse effects of aggressive substances;-- to protect waters (e.g. ground water) from harmful substances;-- to protect the charge from becoming contaminated by components released from the substrate material;-- to achieve a particular surface quality.This standard applies to vessels, apparatus, piping parts and other components for process plants made ofmetallic substrate materials which are in contact with media and are provided with a surface protection madeofa) prefabricated, natural or synthetic rubber based sheeting (subsequently named rubber lining), to be applied in the workshop or on site;b) prefabricated, phenol formaldehyde or epoxy resin based sheeting (subsequently named duroplastic lin- ing), to be applied in the workshop only;c) prefabricated, thermoplastic products (e.g. foils, sheeting, plates, pipes) (subsequently named thermo- plastic lining), to be applied in the workshop or on site.The standard specifies the requirements, acceptance inspection, packaging, transport, storage and installationof organic linings for metallic materials.The tests described in this standard are intended for verification of the suitability of sheeting used for liningsand for acceptance inspection to be carried out on the products during or after application of the lining or aspart of routine inspections to determine any changes effected in the lining during service.
This European Standard specifies a method for the determination of 7 polycyclic aromatic hydrocarbons (PAH) in whole water samples as listed in Table 1. It is applicable to the analysis of PAHs in surface water, which may contain suspended particulate matter (SPM) up to 500 mg/l (whole water samples), drinking water and groundwater. It is possible that this method is applicable to other PAH not listed in the document or other types of water as well, however, it is necessary to verify its applicability before use.
This document describes the requirements for and methods of testing of organic linings which are applied tometallic process engineering equipment that will come in contact with chemical substances. The requirementsspecified here may be used for the purposes of quality control (e.g. as agreed between the contractpartners1)).The standard applies to linings which serve one or more of the following purposes:? to protect the component from adverse effects of aggressive substances;? to protect waters (e.g. ground water) from harmful substances;? to protect the charge from becoming contaminated by components released from the substrate material;? to achieve a particular surface quality.This standard applies to vessels, apparatus, piping parts and other components for process plants made ofmetallic substrate materials which are in contact with media and are provided with a surface protection madeofa) prefabricated, natural or synthetic rubber based sheeting (subsequently named rubber lining), to beapplied in the workshop or on site;b) prefabricated, phenol formaldehyde or epoxy resin based sheeting (subsequently named duroplastic lining),to be applied in the workshop only;c) prefabricated, thermoplastic products (e.g. foils, sheeting, plates, pipes) (subsequently named thermoplasticlining), to be applied in the workshop or on site.The standard specifies the requirements, acceptance inspection, packaging, transport, storage and installationof organic linings for metallic materials.The tests described in this standard are intended for verification of the suitability of sheeting used for liningsand for acceptance inspection to be carried out on the products during or after application of the lining or aspart of routine inspections to determine any changes effected in the lining during service.
